Makita DLS714 Instruction Manual

Also see for DLS714: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

11 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: DLS714Blade diameter 190 mmHole (arbor) diameter (country specific) 20 mm or 15.88 mmMax. kerf thickness of the saw blade 2.2 mmMax. miter angle Left 47°, Right 57°Max. bevel angle Left 45°, Right 5°No load speed 5,700 min -1Dimensions (L x W x H) 655 mm x 430 mm x 445 mmRated voltage D.C. 36 VNet weight 14.4 - 14.7 kg• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combinations, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860BCharger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /DC18SH / DC18WC• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.Cutting capacities (H x W) with blade 190 mm in diameterMiter angle Bevel angle45° (left) 0° 5° (right)0° 40 mm x 300 mm 52 mm x 300 mm 40 mm x 300 mm45 mm x 265 mm(NOTE 1)60 mm x 265 mm(NOTE 1)–45° (left and right) 40 mm x 212 mm 52 mm x 212 mm –45 mm x 185 mm(NOTE 2)60 mm x 185 mm(NOTE 2)–57° (right) – 52 mm x 163 mm –– 60 mm x 145 mm(NOTE 3)–1. Max. Cutting capacity when using a wood facing 20 mm thickness2. Max. Cutting capacity when using a wood facing 15 mm thickness3. Max. Cutting capacity when using a wood facing 10 mm thickness