Makita EN4950H Instruction Manual

Also see for EN4950H: Original instruction manual Original instruction manual Instruction manual Original instruction manual Technical manual

Contents

9WARNING:• Make sure that the engine is turned off, and remove the spark plug cap beforeassembling the pole hedge trimmer.• Wear protective gloves!• Secure cutting blades with the blade cover provided when connecting the trimmerunit to the pole.1. Remove the cap (1) from the shaft.2. Loosen the M5 x 16 bolt (2) and M5 x 25 bolt (3).3. Insert shaft (4) into the cover (5).NOTE: Make sure that the shaft is completely inserted into the cover(approx. 237 mm/ 9-3/8”).If you are having trouble inserting the shaft, manually rotate the drive axle(6) a little and try again.4. Make sure that the shaft is properly inserted and then tighten the M5 x 16 boltand the M5 x 25 bolt. (2)(1)(4)(6) (5) (3)EN4950H EN4951SH(1)ASSEMBLYto engineArrow markATTACHING THE HANDLE (for EN4950H)- Fix the loop handle on the shaft as shown.- To keep a proper distance between the grips, set the loop handle ahead of thearrows.How to wear the shoulder strap- Wear the shoulder strap over the left shoulder.- Keep the pole hedge trimmer unit on the right hand side of the body.- Attach the strap to the hanger provided on the pole hedge trimmer and adjust thelength of the strap to attain a comfortable working position.Detachment- In an emergency, push the notches (1) at both sides, and you can detach themachine from you.Be extremely careful to maintain control of the machine at this time. Do not allowthe machine to be deflected toward you or anyone in the work vicinity.WARNING: Failure to maintain complete control of the machine at all could result inserious bodily injury or DEATH.SHOULDER STRAP (optional accessory)