NAD T585 Owner's Manual

Also see for T 585: Catalog Owner's manual Specifications Service manual Technical bulletin

NAD T585 Owner's Manual Manual pdf 20 page image

20ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKADOLBY DIGITAL SOUNDOne can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic and 2 Channel Digital Stereo.ABOUT DOLBY DIGITAL SOUNDDolby Digital is the surround sound technology used in theatres showing the latest movies, and is now available to reproduce this realistic effect inthe home. You can enjoy motion picture and live concert DVD video discs by connecting the T585 to a 5.1 channel A/V receiver equipped with aDolby Digital decoder (AC-3) or Dolby Digital processor.CONNECTING TO A SURROUND SOUND SYSTEMSetupFrom DIGITAL OUT jack(COAXIAL or OPTICAL)75 ohm coaxial cable oroptical cableFrom S-VIDEO / Component Video /Composite or SCARTS-VIDEO / Component / Composite75–Ohm coaxial or SCART cableTo digital input jack of surroundreceiver equipped with DolbyDigital decoder (coaxial or digital).To S-Video / Component / Compositeor SCART inputs of receiver.Connection exampleFront speaker(left)To S-video input orVideo inputCentrespeakerFront speaker(right)SubwooferRear Speaker(right surround)Rear speaker(left surround)TO ENJOY DOLBY DIGITAL SOUNDYou need to select from the OSD drop down menu of the T585, Audio, ‘Dolby Digital/PCM’ and ‘Sample Freq.’, ‘96 kHz’ or ‘48 kHz’. If uncertain,leave the default ‘Steam/PCM’ and ‘48 kHz’ from the menu. Do not connect the Digital Audio Output of this DVD player to your receiver unless youare connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital or DTS decoding function. High volume soundmay damage your hearing as well as the speakers (Refer to Selecting Digital Audio Output. (Refer to Initial Setup Settings, Audio).NOTERefer to the owner’s manual of your audio equipment as well. Depending on your Dolby Digital surround sound decoder, the decode rate maybe 96 or 48K. When you connect the T585 to other equipment, be sure to turn off the power and unplug all of the equipment from the walloutlet before making any connections. The output sound of the T585 has a wide dynamic range. Be sure to adjust the receiver’s volume to amoderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect ordisconnect the T585’s power cord. If you leave the receiver power on, the speakers may be damaged.To enjoy Dolby Digital sound fromthis DVD player you need thefollowing:• DVD recorded in Dolby Digitalsurround format.• 5.1-channel receiver equippedwith a Dolby Digital decoder,or a Dolby Digital processorand power amplifier.• 5 speakers and 1 sub wooferT585 Safety.qxd 3/23/2006 4:12 PM Page 20