NAD T585 Owner's Manual

Also see for T 585: Catalog Owner's manual Specifications Service manual Technical bulletin

NAD T585 Owner's Manual Manual pdf 22 page image

22ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA2 CHANNEL DIGITAL STEREO SOUNDYou can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input andspeaker system (right and left front speakers).CONNECTING TO A SURROUND SOUND SYSTEMSetupTVFrom the DIGITAL OUT(COAXIAL or OPTICAL) jacksFrom S-VIDEO /Component Video /Composite or SCART75-Ohm coaxial cableor optical cableTo the digital input of an amplifier equipped with either75-Ohm coaxial digital input or digital optical input.To S-VIDEO / Component /Composite or SCARTinputs of the TV.S-VIDEO / Component / Composite75-Ohm coaxial or SCART cableTO ENJOY DIGITAL SOUNDYou need to select from the OSD drop down menu, Audio, ‘Digital Audio Output’, and any of the ‘PCM’ settings, ‘96 kHz’ or ‘48 kHz’. Ifuncertain,leave the default ‘Steam/PCM’ and ‘48 kHz’ from the menu. (Refer to Initial Setup Settings, Audio)NOTES• Refer to the owner’s manual of your receiver as well.• Before you connect the T585 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet beforemaking any connections.• Depending on your Digital sound decoder, the decode rate may be 96 or 48K.• The output sound of the T585 has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, thespeakers may be damaged by a sudden high volume sound.• Turn off the receiver before you connect or disconnect the T585’s power cord. If you leave the receiver power on, the speakers may be damaged.TVT585 Safety.qxd 3/23/2006 4:12 PM Page 22