NAD T585 Owner's Manual

Also see for T 585: Catalog Owner's manual Specifications Service manual Technical bulletin

NAD T585 Owner's Manual Manual pdf 21 page image

21ENGLISHFRANÇAISDEUTSCHNEDERLANDSESPAÑOLITALIANOPORTUGUÊSSVENSKADOLBY PRO LOGIC SURROUND SOUNDOne can enjoy the high quality sound of Dolby Pro Logic Surround Sound if your A/V receiver is equipped with a Dolby Pro Logic Surround Soundprocessor or decoder.CONNECTING TO A SURROUND SOUND SYSTEMSetupTVFrom theMIXED AUDIO L/R jacks75-Ohm audio cablesFrom S-VIDEO / Component Video /Composite or SCARTS-VIDEO / Component / Composite75–Ohm coaxial or SCART cableTo S-VIDEO / Component / Composite orSCART inputs of the receiverConnection example To RCA audio input jacks ofthe surround sound receiverequipped with a Dolby ProLogic decoder To audio inputFront Speaker(left)Front speaker(right)Centre speakerRear speaker (left) Rear speaker (right)To enjoy Dolby Pro Logic soundfrom this DVD player you need thefollowing:• DVD recorded in Dolby ProLogic format.• Dolby Pro Logic A/V receiverequipped with a Dolby ProLogic decoder, or Dolby ProLogic decoder and poweramplifier• 5 speakersTVWITH A RECEIVER EQUIPPED WITH A DOLBY DIGITAL DECODERConnect the equipment the same way as described in Enjoying Dolby Digital Sound. Refer to that A/V receiver’s owner’s manual and set the receiverso you can enjoy Dolby Pro Logic Surround sound.WARNINGDo not connect the Digital Audio Output of this DVD player to your receiver unless you are connecting the DIGITAL OUT jack of this DVD playerto an AV decoder that has the Dolby Digital or DTS decoding function. High volume sound may damage your hearing as well as the speakers(Refer to Initial Setup Settings, Audio)NOTERefer to the owner’s manual of your audio equipment as well. Depending on your Dolby Digital surround sound decoder, the decode rate maybe 96 or 48K. When you connect the T585 to other equipment, be sure to turn off the power and unplug all of the equipment from the walloutlet before making any connections. The output sound of the T585 has a wide dynamic range. Be sure to adjust the receiver’s volume to amoderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. Turn off the receiver before you connect ordisconnect the T585’s power cord. If you leave the receiver power on, the speakers may be damaged.T585 Safety.qxd 3/23/2006 4:12 PM Page 21