NAD T585 Owner's Manual

Also see for T 585: Catalog Owner's manual Specifications Service manual Technical bulletin

NAD T585 Owner's Manual Manual pdf 28 page image

28ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKASELECTING SIGNAL MODETo select the appropriate signal mode according to your TV set, one selects the SETUP menu form theremote. Choose the video icon, ‘Signal Mode’, then one of the four choices that best fit your TV set.1 From the drop-down menu of the OSD screen, use the navigation arrows to select ‘Signal Mode’ onthe remote.2 Use the navigation keys to select the ‘Signal Mode’ and press ENTER on the remote3 Four options will are available; ‘Auto’, ‘NTSC’, PAL’ and, ‘PAL-60’OPTIONSThe ‘Auto’ setting will detect automatically the media being played and display it.The other three settings ‘NTSC’ ‘PAL’, and ‘PAL-60’ can be selected to force the output of the T585 to thedesired format. For example one can load a PAL media and display it in the NTSC format. Similarly onecan load an NTSC media and display it in the PAL format.Depending on the type of TV set you own, select the signal mode you wish to watch the DVD/VCD. Thedefault or automatic setting is “Auto”.SELECTING GAMMA SETTINGTo select the appropriate gamma according to your video monitor, one selects the Setup menu form theremote. Choose “Gamma”, then select from the choices that are available.1 From the drop-down menu of the OSD screen, use the navigation keys to select the video icon, andpress the ENTER on the remote2 Using the navigation arrows, select “Gamma” and then press ENTER. Choose the colour/intensitylinearity for your video monitor and press ENTER. The default setting is 1.000NOTES• Each monitor or display device has a Gamma setting. Please refer to your owner’s manual for yourTV/monitor for the optimum Gamma setting. If you do not know your setting, use the default of1.000.• Please refer to the Reference section video adjustment chart on pages 28 and 33 regarding thefeatures available on each video output.SELECTING BLACK LEVELPersonal taste may require the adjustment of the black level for the DVD disc you are viewing to either“0” or “+7.5” IRE. This adjustment sets the reference level for absolute black as seen on your TV set. Toselect the appropriate Black Level according to your signal mode, one selects the Setup menu from theremote. Choose ‘Video’, ‘Black Level’, then either of the two choices that are available.1 From the Drop-down menu of the OSD screen, use the navigation keys to select video icon, and pressENTER on the Remote2 Using the navigation arrows, select “Black Level” and press ENTER3 Using the navigation arrows, select either ‘0’ or ‘+7.5’ IRE and press ENTERNOTES• The black level defaults are different for each type of T585; NTSC T585 is +7.5 IRE, PAL T585 is 0 IRE.• Setting the black level incorrectly may result in poor contrast when displaying dark scenes.• Please refer to the Reference section video adjustment chart on pages 28 and 33 regarding thefeatures available on each video output.INITIAL SETUP SETTINGSSetupAutoTV AspectPicture ModeSignal ModeBlack LevelBrightnessContrastHueSharpnessGammaVideo OutputNTSCPAL - 60PAL0.7610.8150.8730.9371.0001.0701.1461.2271.315TV AspectPicture ModeSignal ModeBlack LevelBrightnessContrastSaturationSharpnessGammaVideo Output YPbPrTV AspectPicture ModeSignal ModeBlack LevelBrightnessContrastHueSharpnessGammaVideo Output0+ 7.5 IRET585 Safety.qxd 3/23/2006 4:13 PM Page 28