54I/O RelatedOperation Mode Default Option Setting ProcedureWake On LAN• Set to enable/disable Wake OnLANEnable Enable,DisableServer Web Console→ Settings→ Mode SettingsPCI Slot 1 - 14 OpROM• Set to enable/disable BIOSinstalled on the device (board)connected to the PCI busSlot1,14=EnableSlot2 - 13=DisableEnable,DisableBIOS SETUP→ Advanced MenuLaunch PXE/iSCSI ROM• Set to enable/disable BIOSexpanding of legacy networkdeviceEnable Enable,DisableBIOS SETUP→ Advanced MenuLaunch Storage ROM• Set to enable/disable BIOSexpanding of large capacitylegacy storage deviceEnable Enable,DisableBIOS SETUP→ Advanced MenuLAN Controller• Set to enable/disable LANcontrollerEnable Enable,DisableBIOS SETUP→ Chipset MenuLAN1 Option ROM Scan• Set to enable/disable BIOSinstalled on the LAN 1 controllerEnable Enable,DisableBIOS SETUP→ Chipset MenuLAN2 Option ROM Scan• Set to enable/disable BIOSinstalled on the LAN 2 controllerEnable Enable,DisableBIOS SETUP→ Chipset MenuStall Monitoring RelatedOperation Mode Default Option Setting ProcedureBIOS POST Stall Policy• Set BIOS/POST stall monitoring 10 minutes 1 – 60 minute(s)Server Web Console→ Settings→ Mode SettingsOpROM Stall Policy• Set OpROM stall monitoring Disable Enable,DisableServer Web Console→ Settings→ Mode SettingsOS Boot Stall Policy• Set OS boot stall monitoring DisableEnable,Disable,1 – 100 minuteServer Web Console→ Settings→ Mode SettingsFailure Flow Stall Policy• Set failure process stall monitoring 30 minutesEnable,Disable,1 – 60 minuteServer Web Console→ Settings→ Mode SettingsShutdown Stall Policy• Set shutdown stall monitoring 10 minutesEnable,Disable1 – 60 minuteServer Web Console→ Settings→ Mode Settings
