NEC Express 5800 User Manual

Also see for Express 5800: Service guide User guide User guide User guide User guide

Contents

NEC Express 5800 User Manual Manual pdf 652 page image

Operation and Maintenance652Displaying Test Device ListUse command to display the list of test devices.Test Device List is displayed in the tree structure. The tree shows the installed position ofhardware. Except all the memory in the system is displayed in one lump.The following is an example of screen using the command.· The test device list is displayed in the tree structure corresponding to the installed position ofhardware.· In the “Num” row, the test device number of the test device is displayed. Specify the testdevice using these test device number.· In the “*” row, selected test is displayed in “*.” If not selected, the test is displayed in“ ” (blank). If “!” is displayed on a device, it is unselectable as the test device.· In the “Device List” row, the device name of the test device is displayed.· No device is selected for the test device on the initial status just after starting the TeDoLi.· The device information on the lower layer can be collapsed with command for thetree that “-” is added on the top of the device name.· The device information on the lower layer can be expanded with command for thetree that “+” is added on the top of the device name.· The test device type is displayed in the “Type” row. On this type, the test device can beselected by using / 719

Related manuals for NEC Express 5800