Operation and Maintenance668HDD Test(1) OutlineRandom read testThis test reads randomly-selected blocks from a media and check if the data is properlytransmitted.When the blocks are read 200 times, the test round counts up one(This does not mean all the blocks on the disk can be read in one round).(2) Message1. Standard messageMessage ContentDevice information is asfollows.Vendor name : xxProduct name : xxFirmware rev. : xxChannel : xxSCSI ID : xxLUN : xxVender name of device, product name, FW revision andothers are displayed.Random read test start. Randomly reading test is started.Total block : xxBlock size : xxTest start block : xxTest end block : xxTransfer block : xxTest information is displayed.Test is finished normally. Test ended normally.
