Hardware81Processor Memory Modules Adding/Mounting RuleThe following describes how to mount processor modules when adding the modules.Rules of Adding Processor Memory ModulesFor A1080a-S,A1040a Model Processor Memory Module #1 is required. Add in the order of lowest to highest number, i.e., #2, #3, and #4.For A1080a-D Model Processor Memory Modules #1 and #5 are required. Add in the order of lowest to highest number of each server, i.e., #2, #6, #3, #7, #4, and #8.Processor MemoryModule NumberOrder ofMount Slot #1 #2 #3 #4 #5 #6 #7 #8First ● - - - -Second ● ■ - - - -Third ● ♦ ■ - - - -Fourth ● ♦ ♦ ■ - - - -Processor MemoryModule NumberOrder ofMount Slot #1 #2 #3 #4 #5 #6 #7 #8First ● ●Second ● ■ ●Third ● ♦ ● ■Fourth ● ♦ ■ ● ♦Fifth ● ♦ ♦ ● ♦ ■Sixth ● ♦ ♦ ■ ● ♦ ♦Seventh ● ♦ ♦ ♦ ● ♦ ♦ ■IMPORTANT:Note that the rule of adding modules differs depending on themodel such as A1080a-S, A1080a-D, and A1080a-E.●: Required♦ : Already Mounted■: Adding● : Required♦ : Already Mounted■ : AddingIMPORTANT:A1080a-D model can adopt a different configuration for eachserver by using the configuration change service at the time ofpurchase.IMPORTANT:When the Processor Memory Module is added or exchanged,it is necessary to set "Core Status" from System Web Console.Refer to Setting CoreStatus.
