Setup and Operation 2-7How to Start SetupTo start the Setup utility, follow these steps:1. Turn on or reboot the system. Setup displays the following message:F2 to run Setup2. Press F2 twice as soon as the message is displayed, as it appears only briefly.Setup’s Main Menu window appears similar to the following screen.NOTE: The screen shown is typical of thesystem. The actual items on the Main Menudepend upon the hardware installed in thesystem.How to Use SetupThe Setup utility has a Main Menu window and five top-level menus with submenus.The Main Menu window contains the following areas:n A title line — the top line of the Main Menu. This line displays the Setup utilityname and copyright message.n The menu bar — the line under the Setup title line. The menu bar contains fivetop-level menus for setting system parameters.PhoenixBIOS Setup — Copyright 1985-94 Phoenix Technologies Ltd.Main Advanced Security ExitSystem Time: [ 10 :19:20] Item Specific HelpSystem Date: [11/12/1994]Diskette A: [1.44 MB, 3 ½"] , , orDiskette B: [Not Installed] selects field.> IDE Adapter 0 Master: C: 420 Mb> IDE Adapter 0 Slave: None> IDE Adapter 1 Master: None> IDE Adapter 1 Slave: NoneVideo System: [EGA/VGA]> Memory Cache:> Memory Shadow: [Enabled]> Boot sequence: [A: then C:]> Numlock: [Auto]System Memory: 640 KBExtended Memory: 7 MBF1 Help ↑↓ Select Item -/+ Change Values F9 Setup DefaultsESC Exit ←→ Select Menu Enter Select > Sub-Menu F10 Previous Values