1746. Installation and ConnectionsConnecting Your DVD Player or Other AV EquipmentConnecting Video/S-Video Input• Select the source name for its appropriate input connector after turning on the projector.Input connector SOURCE button on the projectorcabinet Button on the remote controlVIDEO IN VIDEO VIDEOS-VIDEO IN S-VIDEO S-VIDEONOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements.NOTE:• An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scanconverter.• Video signals can be projected when a video cable (commercially available) is connected to the Computer 3 video input connector’sG/Y connector.In this case, set the on-screen menu’s SETUP → OPTION(1) → SIGNAL SELECT(COMP3) to [VIDEO] and select Computer 3 forthe input selection.Video cable (not supplied)BNC (male) to RCA (female)adapter (not supplied)S-Video cable (not supplied)Audio equipmentAudio cable (not supplied)
