533. Convenient Features⓫ Displaying a Picture Using [EDGE BLENDING]The EDGE BLENDING function allows a multi-screen image with high resolution to be displayed on a large screen.This function adjusts overlapping edges of images projected from each projector to uniform multi-screen images.NOTE:• For projector throw distances, refer to “Throw distance and screen size” on page 219, 220, 221.• Before performing the Edge Blending function, place the projector in the correct position so that the image becomes square inthe appropriate size, and then make optical adjustments (lens shift, focus, and zoom).Before explaining use of the Edge Blending functionThis section explains the case for “Example: Placing two projectors side by side”. As shown, the projected image onthe left is referred to as “Projector A” and the projected image on the right is referred to “Projector B”. Unless otherwisespecified hereinafter, the “projector” is used to mean both A and B.Example: Placing two projectors side by sideEdge Blending areaProjected area Projected areaProjector A Projector BPreparation:• Turn on the projector and display a signal.• To use two or more projectors, you have to turn on [CONTROL ID] from the menu. For more information, refer to“Setting ID to the Projector [CONTROL ID]” on page 131.① Enable [EDGE BLENDING].1 Select [SETUP] → [EDGE BLENDING] and press the ENTER button.
