182. Projecting an Image (Basic Operation)❸ Turning on the ProjectorNOTE:• The projector has two power switches: A main power switch and a POWER button (POWER ON and OFF on the remote control)• Turning on the projector:1. Press the main power switch to the ON position (I).The projector will go into standby mode.2. Press the POWER button .The projector will become ready to use.• Turning off the projector:1. Press the POWER button.The confirmation message will be displayed.2. Press the POWER button again.The projector will go into standby mode.3. Press the main power switch to the OFF position (O).The projector will be turned off.Remove the lens cap.1. Press the main power switch to the ON position ( I ).The projector will go into standby mode. When in standbymode, the POWER indicator will light orange and the STA-TUS indicator will light green when [NORMAL] is selectedfor [STANDBY MODE]. See the Power Indicator section.(→ page 232)When you are working in a dark room, it is convenient touse the LED lights on the projector.Press the LIGHT button to turn on the LED lights to illu-minate the control panel and the terminal panel; press itagain to turn off the LED light.
