453. Convenient FeaturesViewing Two Pictures1. Press the PIP/FREEZE button on the remote control.The PIP/PICTURE BY PICTURE SOURCE screen will be displayed.2. Use the ▲ or ▼ button to select the source and press the ENTER button.The PIP screen or PICTURE BY PICTURE screen will be displayed, depending on which was selected in the[MODE] setting screen.3. Press the PIP/FREEZE button again to return to the normal screen (single picture).TIP:• Selecting another source will return to the normal screen.• Selecting a source not supported for the main picture or the sub picture will return to the normal screen.[POSITION]This option allows you to select the position of a sub picture in the main picture.NOTE:• The default setting is [BOTTOM-RIGHT].Use the ▲ or ▼ button to select the sub picture’s position and press the ENTER button.The options are: TOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, and BOTTOM-RIGHT.The following adjustments and settings are available for the main picture only.- Adjusting picture- Magnifying a picture with the D-ZOOM/ZOOM +/− button.The following operations are available for both the main and sub pictures.- Picture mute- Freezing a moving picture
