272. Projecting an Image (Basic Operation)Adjusting the vertical position of a projected image (Lens shift)NOTE:• The lens shift function is not available on the projector with NP25FL (fixed focus) lens installed.Return the lens shift position to the home position before installing the lens to the projector.• Shifting the lens to the maximum in two directions combined will cause the edges of the image to become dark or will causesome shadows.Adjusting with buttons on the cabinet1. Press one of the LENS SHIFT ▼▲◀▶ buttons.2. Use the LENS SHIFT ▼▲◀▶ buttons to move the projected image.Returning the lens shift position to the home positionPress and hold the SHUTTER/HOME POSITION button for 2 seconds to return the lens shift position to the homeposition (nearly center position)
