Installation RequirementsUnpacking the Equipment6 NVM-2e/i-Series Quick Setup Guide Chapter 2: Installing the Voice MailUnpacking the Equipm en tInstallation RequirementsUnpacking the Equipm en tUnpacking the EquipmentUnpack the Voice Mail equipment and make sure you have the following items: NVM-2e Voice Mail cabinet (P/N 17780) External power supplyGeneral Equipment RequirementsYou will also need the following items: Standard Telecom tools, including a Phillips-head screwdriver ESD wrist strap (to be worn at all times) Laptop or other IBM-compatible computer containing a standard communications softwareprogram, such as Procomm Plus Surge Protector Standard sheet rock (dry-wall) screws, a center-hole punch (or other pointed tool), tape, andhammer RJ-45 null modem cable The manuals for your telephone systemPhone System RequirementsEach Voice Mail port must be connected to an analog extension circuit in the phone system. Youmay connect the Voice Mail port directly to the analog station port or to a port on a 2-OPX Module.For each Voice Mail port, you may use:- at least one modular line cord- a port on a 2-OPX Module (if desired)- cross-connect wire and modular jack assemblies (see the phone system manual for details).
