Connecting the Voice Mail to a Phone SystemConnecting to the i-Series Phone System10 NVM-2e/i-Series Quick Setup Guide Chapter 2: Installing the Voice MailConnecting the Vo ice Mail to a Phone SystemConnecting to the i-Series Phone SystemConnecting the Voice Mail to the i-Series Phone SystemTo connect the NVM-2e to the i-Series Phone System:1. Plug one end of a modular line cord into Port 1 on the NVM-2e.Plug the other end into an analog station port or a port on a 2-OPX Module, asshown in Figure 6.2. Repeat step 1 for Port 2.3. Repeat step 1 for Ports 3 and 4 if your Voice Mail contains 4 ports..Figure 6: Connecting an i-Series Phone System to the NVM-2eAvailability: All versions of the NVM-2e integrate with the i-Series.IMPORTANT NOTEExtensions will receive notification of new messages (blinking Message Waiting Lightsand interrupted dial tone for single line phones) only if Voice Mail Port 2 is connectedto the phone system.1 224 VAC0.7A 50-60HzIOIOINVM2exVB-C6AC AdapterAC Power CordPort 2 Port 4Port 1 Port 3To Analog Station Portora Port on a 2-OPX ModuleTo Analog Station Portora Port on a 2-OPX Module
