Installing Options 5-41Preparing the DeviceBefore installing a storage device in the system, follow any preinstallationinstructions that come with the device. For example, check the followinginformation:! Diskette drive — remove any termination on the optional diskettedrive. See the documentation that comes with the drive.! IDE drive — check the jumper settings on the device before installingit. See the documentation that comes with the device for jumpersetting information.! CD-ROM drive or DVD-ROM drive must be set correctly as the first(master) or second (slave) device on the IDE channel.See “Connecting Device Cables” for more information.Connecting Device CablesThe cables used for installing optional storage devices include thefollowing:! diskette drive signal cable! IDE signal cables! internal SCSI device cables! PC adapter card cables! system power cables.Riser board cable drive connectors are shown in the following figures.The Wake-On LAN connector on the desktop riser board is not shown. Itis located above the PCI slot and to the right of the Modem In connector.
