Configuring the System 3-23Boot Menu ItemsMenu Item Settings (default is bold) and descriptionAfter Power Failure Power On, Stay Off, Last StateWhen After Power Failure is set to Power On, thesystem powers on after a power failure. With theStay Off setting, the system does not power on aftera power failure. With the Last State setting thesystem powers on only if it was powered on whenthe power failure occurred.If the field is set to Stay Off, the On LAN boot optiondoes not work, even if the On LAN field is set toEnabled.Floppy Check Disabled, EnabledOn Modem Ring Power On, Stay OffThis option enables an external modem to workeven when the system is in a power reduction state.Full power is restored to the system so it can receivethe modem ring when the setting is Power On.On LAN Power On, Stay OffThis option enables the system to be contacted via aLAN even when your system is in a power reductionstate. On LAN does not work if the After PowerFailure option is set to Stay Off.On PME Power On, Stay OffThis field controls how the system responds to a PCIPower Management Enable (PME) wake up event.
