925. Using On-Screen Menu[SIGNAL TYPE]Selection of RGB and component signals. Normally, this is set to [AUTO]. Please change the setting if the color ofthe image remains unnatural.AUTO ��������������������� Automatically distinguishes RGB and component signals�RGB ����������������������� Switches to the RGB input�REC601������������������ Switches to the component signal conforming to the ITU-R BT�601 standard�Setting appropriate to SDTV images�REC709������������������ Switches to the component signal conforming to the ITU-R BT�709 standard�Setting appropriate to HDTV images�REC2020���������������� Switches to the component signal conforming to the ITU-R BT�2020 standard�Setting appropriate to 4K images�[VIDEO LEVEL]Selection of the video signal level when connecting an external device to the HDMI 1 IN terminal, HDMI 2 IN terminal,DisplayPort1 IN terminal, DisplayPort2 IN terminal, and HDBaseT IN terminal of the projector.AUTO ��������������������� The video level is switched automatically based on the information from the device outputting the signal�Depending on the connected device, this setting may not be made properly� In this case, switch to [NORMAL]or [ENHANCED] from the menu and view with the optimum setting�NORMAL���������������� This disables the enhanced mode�ENHANCED ������������ This improves the image’s contrast, expressing the dark and light sections more dynamically�SUPER WHITE ������� The video contrast is improved and the dark areas appear more dynamic�[HDR MODE]AUTO ��������������������� Automatically distinguishes HDR signal�OFF ������������������������ Projects the image based on the input signalON ������������������������� Projects the image conforming to the HDR signalNOTE:• These options are available exclusively for 4K signal.
