142. Projecting an Image (Basic Operation)❷ Connecting Your Computer/Connecting the Power Cord1. Connect your computer to the projector.This section will show you a basic connection to a computer. For information about other connections, see “6-2.Connecting to Other Equipment” on page 135.Connect the HDMI output terminal of the computer to the HDMI1 or HDMI2 input terminal of the unit.2. Connect the supplied power cord to the projector.WARNINGMAKE SURE TO TAKE THE GROUND CONNECTION FOR THE DEVICE.TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.DO NOT USE THIS UNIT'S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THEPRONGS CAN BE FULLY INSERTED.CAUTIONThis equipment is designed to be used in the condition of the power cord connected to earth. If the power cordis not connected to the earth, it may cause electric shock. Please make sure the power cord is earthed properly.Important Information:• When plugging in or unplugging the supplied power cord, make sure that the main power switch is pushedto the off [O] position. Failure to do so may cause damage to the projector.• Do not use a three-phase power supply. Doing so may cause of malfunction.First connect the supplied power cord’s three-pin plug to the AC IN terminal of the projector, and then connectthe other plug of the supplied power cord in the wall outlet. Do not use any plug converter.HDMI IN1 HDMI IN2Make sure that the prongs are fully inserted intoboth the AC IN terminal and the wall outlet.To wall outletHDMI cable (with ferrite core)(sold commercially)
