192. Projecting an Image (Basic Operation)❹ Selecting a SourceSelecting the computer or video sourceNOTE:• Turn on the computer or video source equipment connected to the projector.Using the Direct buttonPress the Direct button on the projector cabinet or remote control.Select the input according to the connection terminal.Input connector Button on the projectorcabinetButton on the remotecontrolNoteHDMI1/2 IN HDMI 1/2 HDMI Switches between HDMI1 and HDMI2 each timeit is pressed.DisplayPort 1/2 IN DisplayPort 1/2 DisplayPort • Switches between DisplayPort1 and DisplayPort2each time it is pressed.• Select DisplayPort1 for dual link.SDI 1/2/3/4 IN SDI AUX • Switches between SDI1, SDI2, SDI3 and SDI4each time it is pressed.• Select SDI1 for quad link or dual link.HDBaseT HDBaseT/SLOT NETWORK Each time the button of the projector cabinet ispressed, the mode switches between HDBaseTand SLOT.SLOT HDBaseT/SLOT SLOT Each time the button of the projector cabinet ispressed, the mode switches between HDBaseTand SLOT.
