1025. Using On-Screen Menu[PICTURE SETTING]This sets the division conditions for reducing or enlarging the image area and displaying it in the desired position orfor projecting using a combination of several projectors.Please refer to “4. Multi-Screen Projection” (→ page 57) for details.MODE OFF Use the projector in a standalone state.ZOOM This adjusts the position and width of the video area that you wish to divide. The edgeblending width will also be automatically set to that width.TILING This assigns the divided screens to the projectors.ZOOM HORIZONTALZOOMThis enlarges the video area in the horizontal direction.VERTICALZOOMThis enlarges the video area in the vertical direction.HORIZONTALPOSITIONThis shifts the video area in the horizontal direction.VERTICAL PO-SITIONThis shifts the video area in the vertical direction.TILING WIDTH This selects the number of projectors to be arranged horizontally.HEIGHT This selects the number of projectors to be arranged vertically.HORIZONTALPOSITIONThis selects the position of the projector starting from the left among those arrangedhorizontally.VERTICAL PO-SITIONThis selects the position of the projector starting from the top among those arrangedvertically.
