NEC PlasmaSync 50MP2 User Manual

Also see for PlasmaSync 50MP2: Brochure & specs User manual

Contents

4Rear View/ Terminal BoardA EXT SPEAKER L and RConnect speakers here. Maintain the correct polarity.B VIDEO1, 2, 3Connect VCR’s, DVD’s or Laser Discs, etc. here.C DVD1 / HD1Connect DVD’s, High Definition or Laser Discs, etc.here.D RGB1Inputs the analog RGB signal of personal computer,etc.E RGB2/ DVD2/ HD2RGB2: Inputs the analog RGB signal.DVD2/ HD2: Connect DVD’s, High Definition orLaser Discs, etc. here.F RGB3 (DVI 29pin)Inputs a digital RGB signal (TMDS).G CONTROL LOCKWhen “CONTROL LOCK” is set “ON”, the buttonson the set’s control panel do not function.H REMOTE CONTROLConnect the supplied remote cable here.I EXTERNAL CONTROLThis terminal is used when power ON/OFF, inputselection and AUDIO MUTE and other controls areoperated externally (by external control). See also page41 for external control.J AUDIO1, AUDIO2, AUDIO3These are audio input terminals.The input is selectable. Set which video image to allotthem to on the menu screen.K AC INConnect the included power cord here.AC-INSPEAKERS MUSTHAVE MORE THAN7WATT RATINGIMPEDANCE 6 OHMRIGHT LEFT EXTERNALCONTROLREMOTECONTROLCONTROLLOCKON / OFFRGB 3(Digital RGB)RGB 1R / CR / PRL ( MONO )VIDEO 1L ( MONO )G / YB / CB / PBHDVDRVIDEO 2VIDEO 3RYCB / PBCR / PRL ( MONO )RAUDIO 2 DVD1/HD1AUDIO 3 AUDIO 1RGB2/DVD2/HD2EXTERNALCONTROLREMOTECONTROLCONTROLLOCKON / OFFRGB 3(Digital RGB)RGB 1R / CR / PRL ( MONO )VIDEO 1L ( MONO )G / YB / CB / PBHDVDRVIDEO 2VIDEO 3RYCB / PBCR / PRL ( MONO )RAUDIO 2 DVD1/HD1AUDIO 3 AUDIO 1RGB2/DVD2/HD2SPEAKERS MUSTHAVE MORE THAN7WATT RATINGIMPEDANCE 6 OHMRIGHT LEFTKABJCIHGFED