NEC PlasmaSync 50MP2 User Manual

Also see for PlasmaSync 50MP2: Brochure & specs User manual

Contents

23Adjusting the color to the desired qualityUse this procedure to adjust the white balance for brightpictures and dark pictures to achieve the desired colorquality.Example: Adjusting the “WHITE BALANCE”Press the PROCEED button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “PICTURE”, thenpress the PROCEED button.The “PICTURE” screen appears.2. Use the and buttons to select “COLOR TEMP.”.P I C T U R E: MEMORY: 2: OFFR GSEL. ADJ. RETURNEXITCONTRASTBRIGHTNESSSHARPNESSCOLORTINTPICTURE MODECOLOR TEMP.NR3. Use the and buttons to select “PRO”.The mode switches as follows when the and buttons are pressed:→ 2 ↔ 3 ↔ PRO ↔ 1 ←PRO:COLOR TEMP.* If neither the or button is pressed within 5 seconds,the current selection is set and the previous screen reappears.4. Press the PROCEED button.The “WHITE BALANCE” screen appears.5. Use the and buttons to select “RED-GAIN”.W H I T E B A L A N C ESEL. ADJ. RETURNEXITGAINREDGREENBLUEBIASREDGREENBLUE6. Adjust the white balance using the and buttons.RED* If neither the or button is pressed within 5 seconds,the current setting is set and the previous screen reappears.7. Once the adjustment is completed...Press the EXIT button several times to return to themain menu. To delete the main menu, press the EXITbutton once more.Information Adjusting the white balanceRGB-GAIN ....... White balance adjustment for signallevelRGB-BIAS ....... White balance adjustment for blacklevel Restoring the factory default settingsSelect “RESET” under the function menu. Note thatthis also restores other settings to the factory defaults.