NEC PlasmaSync 50MP2 User Manual

Also see for PlasmaSync 50MP2: Brochure & specs User manual

Contents

34The 2nd line of the “WORKING TIME”:→ 0M ↔ 3M ↔ 6M ↔ 9M ↔ ... ↔ 57M ←The 1st line of the “WAITING TIME”:→ 0H ↔1H ↔ 2H ↔ 3H ↔ ... ↔ 12H ←The 2nd line of the “WAITING TIME”:→ 0M ↔ 3M ↔ 6M ↔ 9M ↔ ... ↔ 57M ←6. Once the setting is completed...Press the EXIT button several times to return to themain menu.To delete the main menu, press the EXIT button oncemore.Information Setting the timeWORKING TIMESet the length of time the “INVERSE/WT” mode lasts.When the WORKING TIME is set to “ON”, the“INVERSE/WT” mode stays in the on state.WAITING TIMESet the length of time until the “INVERSE/WT” modestarts.* The “WORKING TIME” and “WAITING TIME” canbe set for up to 12 hours and 45 minutes in units of 3minutes. To select “ON” for the “WORKING TIME”...Set the hours of the WORKING TIME to 0H and theminutes to 0M. “ON” will be displayed.Setting the time for “SCREEN WIPER”Set the “SCREEN WIPER” operation time, “WAITINGTIME”, and “SPEED”.Example: Setting so that the SCREEN WIPER modestarts in 30 minutes and proceeds for one and a halfhours.Perform Steps 1-2 on Page 32, then:3. Use the and buttons to select “SCREEN WIPER”,then use the and buttons to select “ON”.L O N G L I F E: AUTO: OFF: OFF: ONRETURNEXITPLEORBITERINVERSESCREEN WIPERSEL. OKPROCEED4. Press the PROCEED button.The “SCREEN WIPER” screen appears.S C R E E N W I P E R: ON: 1SEL. ADJ. RETURNEXITWORKING TIMESPEED5. Adjust the time and speed using the and buttonsand the and buttons.The mode switches as follows each time the and button is pressed.S C R E E N W I P E R: 1H: 30M: 0H: 30M: 1SEL. ADJ. RETURNEXITWORKING TIMEWAITING TIMESPEEDThe 1st line of the “WORKING TIME”:→ ON or 0H ↔ 1H ↔ 2H ↔ 3H ↔ ... ↔ 12H ←* The “WORKING TIME” (minutes) and “WAITINGTIME” cannot be set when the “WORKING TIME”is “ON”.