40Setting the video signal formatUse these operations to set the video signal format.Example: Setting the video signal format to “3.58NTSC”Press the PROCEED button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “INFORMATION”,then press the PROCEED button.The “INFORMATION” screen appears.2. Use the and buttons to select “COLOR SYSTEM”,then press the PROCEED button.I N F O R M AT I O NRETURNEXITFREQUENCYLANGUAGECOLOR SYSTEMSEL. OKPROCEEDThe “COLOR SYSTEM” screen appears.C O L O R S Y S T E MRETURNEXIT: AUTO1ADJ.COLOR SYSTEM3. To select “3.58 NTSC” ...Use the and buttons to select “3.58 NTSC”.The mode switches as follows when the and buttons are pressed:→ AUTO1 ↔ AUTO2 ↔ 3.58NTSC ↔ 4.43NTSC ←→ SECAM ↔ PAL-M ↔ PAL-N ↔ PAL60 ↔ PAL ←C O L O R S Y S T E MRETURNEXIT: 3.58NTSCADJ.COLOR SYSTEM4. Once the setting is completed ...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.The color system is set to “3.58 NTSC”.Information Video signal formatsDifferent countries use different formats for videosignals. Set to the format used in your current country.AUTO1/2 ......... The video signals are automaticallydetected and the format is setaccordingly.AUTO1: 3.58NTSC, 4.43NTSC, PAL, SECAM,PAL60AUTO2: PAL-M, PAL-N, 3.58NTSCPAL (B, G) ....... This is the standard format usedmainly in the United Kingdom andGermany.SECAM ............. This is the standard format usedmainly in France and Russia.4.43 NTSC,PAL60 .............. This format is used for videos incountries using PAL and SECAMvideo signals.3.58 NTSC ...... This is the standard format usedmainly in Japan and the United States.PAL-M ............. This is the standard format usedmainly in Brazil.PAL-N .............. This is the standard format usedmainly in Argentina.