20Picture Settings MenuAdjusting the pictureThe contrast, brightness, sharpness, color and tint can beadjusted as desired.Example: Adjusting the contrastPress the PROCEED button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “PICTURE”, thenpress the PROCEED button. The “PICTURE” screenappears.2. Use the and buttons to select “CONTRAST”.P I C T U R ECONTRASTBRIGHTNESSSHARPNESSCOLORTINTPICTURE MODECOLOR TEMP.NR: MEMORY: 2: OFFR GSEL. ADJ. RETURNEXIT3. Use the and buttons to adjust the contrast.CONTRAST* If neither the or button is pressed within 5 seconds,the current setting is set and the previous screenreappears.4. Once the adjustment is completed ...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Note: If “CAN NOT ADJUST” appears ...When trying to enter the PICTURE submenu, make surePICTURE MODE is set to MEMORY.Information Picture adjustment screenCONTRAST .... Changes the picture’s contrast.BRIGHTNESS . Changes the picture’s brightness.SHARPNESS .. Changes the picture’s sharpness.Adjusts picture detail of VIDEOdisplay.COLOR ........... Changes the color density.TINT ................ Changes the picture’s tint. Adjust fornatural colored skin, background, etc. Adjusting the computer imageOnly the contrast and brightness can be adjusted whena computer signal is connected. Restoring the factory default settingsSelect “RESET” under the “PICTURE MODE” settings.