NEC PlasmaSync 50MP2 User Manual

Also see for PlasmaSync 50MP2: Brochure & specs User manual

Contents

29Setting the power management for computer imagesThis energy-saving (power management) functionautomatically reduces the monitor’s power consumptionif no operation is performed for a certain amount of time.Example: Turning the power management function onPress the PROCEED button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “FUNCTION”, thenpress the PROCEED button.The “FUNCTION” screen appears.2. Use the and buttons to select “POWER MGT”.F U N C T I O N: ON: 1: OFF: 3: ON: 1SEL. ADJ. RETURNEXITOSMOSM ADJ.POWER MGTGRAY LEVELCINEMA MODERGB3 ADJ.LONG LIFERESET3. To turn the power management function on ...Use the and buttons to select “ON”.The mode switches as follows each time the or button is pressed:ON ↔ OFFF U N C T I O N: ON: 1: ON: 3: ON: 1SEL. ADJ. RETURNEXITOSMOSM ADJ.POWER MGTGRAY LEVELCINEMA MODERGB3 ADJ.LONG LIFERESET4. Once the setting is completed ...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Information Power management function* The power management function automatically reducesthe monitor’s power consumption if the computer’skeyboard or mouse is not operated for a certain amountof time. This function can be used when using themonitor with a computer conforming to the VESADPMS format.* If the computer’s power is not turned on or if thecomputer and selector tuner are not properly connected,the system is set to the off state.* For instructions on using the computer’s powermanagement function, refer to the computer’s operatinginstructions. Power management settingsON ................... In this mode the power managementfunction is turned on.OFF ................. In this mode the power managementfunction is turned off. Power management function and POWER/STANDBY indicatorThe POWER/STANDBY indicator indicates the statusof the power management function. See page 30 forindicator status and description. Restoring the factory default settingsSelect “RESET” under the function menu. Note thatthis also restores other settings to the factory defaults.