NEC PlasmaSync 50PD2 User Manual

Contents

E-58 †PLASMA M ONITOR45. VOLUME Gain Data RequestFunctionThe master monitor changes the VOLUME gaindata of the slave.Transmission data0FH UA1 UA2 46H 00H CKSACKDATA00 : VOLUME Gain00H : 0|18H : 24DATA01 : BALANCE GainE8H : -24|00H : 0|18H : +24DATA02 : MUTE00H : OFF01H : ON46. SOUND INPUT SELECT RequestFunctionThe master monitor requests the status of theaudio input of the slave.Transmission data0FH UA1 UA2 60H 00H CKSACK6FH UA1 UA2 60H 02H DATA00–01 CKSDATA00 : INPUT100H : VIDEO01H : RGB102H : RGB2, DVD/HD, SCART03H : RGB3DATA01 : INPUT200H : VIDEO01H : RGB102H : RGB2, DVD/HD, SCART03H : RGB341. MULTI MODE RequestFunctionThe master monitor requests the status ofMULTI MODE of the slave for master.Transmission data0FH UA1 UA2 3BH 00H CKSACK6FH UA1 UA2 3BH 02H DATA–02 CKSDATA00 : SCREEN DIVIDER SETTING01H : Single mode02H : -03H : Multi mode 4 screens04H : Multi mode 9 screensDATA01 : POSITION OF DIVIDENOTE: When DATA00 is 01H, this data is invalid.01H : Upper left selected (4 screens)02H : Upper right selected (4 screens)03H : Lower right selected (4 screens)04H : Lower left selected (4 screens)05H : -06H : -07H : Top left selected (9 screens)08H : Top middle selected (9 screens)09H : Top right selected (9 screens)0AH : Middle left selected (9 screens)0BH : Middle center selected (9 screens)0CH : Middle right selected (9 screens)0DH : Bottom left selected (9 screens)0EH : Bottom middle selected (9 screens)0FH : Bottom right selected (9 screens)42. OSM SelectFunctionThe external equipment switches the on-screenmenu (OSM) of the display unit ON and OFF.Transmission DataDFH 80H 60H 58H 01H DATA00 CKSDATA0001H : OSM ON (During normal operation)02H : OSM OFFACK7FH 60H 80H 58H 01H DATA00 CKSDATA0001H : OSM ON02H : OSM OFF* Use this command with the setting of bits 0and 1 fixed as follows: bit 0 = 1, and bit 1 = 1.* ACK should be ignored in the case of a cas-cade connection.43. VOLUME Gain DataFunctionThe master monitor changes the volume gaindata of the slave.Transmission dataCFH UA1 UA2 21H 03H DATA00–02 CKSDATA00 : VOLUME Gain00H : 0|18H : 24DATA01 : BALANCE GainE8H : -24|00H : 0|18H : +24DATA02 : MUTE00H : OFF01H : ONACK6FH UA1 UA2 21H 03H DATA00–02 CKSDATA00 : VOLUME GainDATA01 : BALANCE GainDATA02 : MUTE44. SOUND INPUT SelectFunctionThe master monitor changes the audio input ofthe slave.Transmission dataCFH UA1 UA2 05H 02H DATA00–01 CKSDATA00 : INPUT100H : VIDEO01H : RGB102H : RGB2, DVD/HD, SCART03H : RGB3DATA01 : INPUT200H : VIDEO01H : RGB102H : RGB2, DVD/HD, SCART03H : RGB3ACK6FH UA1 UA2 05H 02H DATA00–01 CKSDATA00 : INPUT1DATA01 : INPUT2Appendix