E-12 †PLASMA M ONITORConnecting Your PC or IBM compatibleConnecting your PC to your Plasma monitor will enable you to display your computer's screen image.Some video cards may not display an image correctly.If you wish to input wide signals, make the “RGB MODE” and “INPUT MODE” settings.(See "Signal Identification For Raster Preset" on page E-62.)Connect the Plasma Monitor to Your PC or IBM Compatible• To connect the RGB 1 IN connector (mini D-sub 15 pin) on the plasma monitor, use the supplied RGB signal cable (mini D-sub 15 pin tomini D-sub 15 pin).• To connect the RGB 2/DVD/HD IN connector (BNC) on the plasma monitor, use the optional signal cable (mini D-sub 15 pin to BNC x 5).Select [RGB] for RGB 2 from the INPUT SELECT menu.When connecting one or more Plasma monitors, use the RGB 2/DVD/HD OUT connector (BNC).• The AUDIO IN 1 and 2 can be both used for audio input. For connection, select [INPUT 1] or [INPUT 2] from the SOUND menu.ConnectionsAUDIO OUTL RAUDIO IN 2L(MONO) RVIDEOOUTS-VIDEO VIDEOAUDIO IN 1EXTERNAL CONTROLRGB 1L(MONO) RININ OUTINOUTINRGB 2 /DVD /HDG/ Y B/ CB/ PB H/ CS VR/ CR/ PR REMOTERGB 3 AC ININ OUTC/ LINPlasma monitorPlasma monitor (second monitor)To audio right outputTo RGB 2/DVD/HD INBNC x 5BNC x 5RCAMini D-sub 15 pinBNC x 5Mini D-sub 15 pinTo analog RGB outputPC or IBM compatibleTo audio left output