E-20 †PLASMA M ONITORIcon Configuration menu Sub menu Adjustment settings Page(None)Sets whether or not the main menu is displayed.Sets whether or not the second screen of the main menuis displayed.Sets whether or not wireless transmission of the remotecontrol is enabled.Sets the sync signals that will be automatically selected.Sets the brightness of the screen when there are multiplescreens.Returns all adjustments and settings of CONFIG MENU tothe factory default values.CONFIG MENU(Configuration menu)To display this menu, pressand hold the button and thePROCEED button at thesame time for 3 seconds orlonger on the remote controlor the main unit.OSD DISPLAYOSD MODEWIRELESS REMOTECONTROLSYNC MODEPLE LINKALL RESETE-23E-23E-23E-23E-23E-23Menu Operations (On-screen Menu)Use of the on-screen menu (OSM) function allows the setting of a variety of detailed adjustments. The adjustment settings are retainedeven when the power is switched off.The on-screen menu (OSM) function displays a menu on the screen from which the adjustments are made. List of Setting DetailsIcon Main menu Sub menu Adjustment settings PageSOUND(Audio settings)VOLUMEBALANCEMUTEINPUT1INPUT2Volume adjustmentLeft-right balance adjustmentMute settingSets audio input to AUDIO IN 1Sets audio input to AUDIO IN 2E-24E-24E-24E-24E-24VISUAL CONTROL(Picture adjustments)BRIGHTNESSCONTRASTSHARPNESSCOLORTINTScreen brightness adjustmentImage contrast adjustmentImage sharpness adjustmentAdjustment of color saturationTint adjustmentE-25E-25E-25E-25E-25AUTO PICTURE(Auto picture/Wide screensettings)AUTO PICTUREINPUT MODERGB MODEWIDE MODEAutomatic adjustment of clock frequency/clock phaseThis is set when switching of input signal discrimination isrequired.Sets the mode (moving picture/still picture mode) to suitthe input signal.WIDE MODE settingE-26E-26E-26E-27H-POSITION(Horizontal position adjustment)H-POSITIONH-WIDTHHorizontal position adjustment of the screenScreen width adjustmentE-29E-29V-POSITION(Vertical position adjustment)V-POSITIONV-HEIGHTVertical position adjustment of the screenScreen height adjustmentE-29E-29INPUT SELECT(Input selection)RGB2SCARTRGB signal or DVD/HD signal settingSets whether or not the SCART jack is connected.(not used in the United States.)E-30E-30NORMAL(Standard settings)ALL RASTER NORMALALL VISUAL NORMALALL NORMALReturns the horizontal/vertical position and other adjust-ments of the screen to the default settings.Returns the audio settings, picture, and color temperatureadjustments to the default settings.Returns all adjustments and setting to default values.E-31E-31E-31(To Page 2) Setting [OSD MODE] to [PRO] on the configuration menudisplays the second page of the main menu.Main Menu Page 1 Items