PLASMA M ONITOR † E-15AUDIO OUTL RAUDIO IN 2L(MONO) RVIDEOOUTS-VIDEO VIDEOAUDIO IN 1EXTERNAL CONTROLRGB 1L(MONO) RININ OUTINOUTINRGB 2/DVD/HDG /Y B /C B /P B H /CS VR /C R /P R REMOTERGB 3 AC ININ OUTC /LINConnectionsConnecting Your VCRConnecting your VCR or laser disc player to your Plasma monitor will enable you to display your VCR' s or laser disc player' s video.Refer to your VCR or laser disc player owner's manual for more information.Connect the Plasma Monitor to a VCR or Laser Disc Player• To connect the VIDEO IN connector (BNC) on the plasma monitor, use a separately available BNC connector cable. You will need aseparately available BNC-to-RCA adapter to connect a VCR or laser disc player with an RCA pin jack to the BNC connector cable.• When connecting one or more Plasma monitors, use the VIDEO OUT connectors (BNC).• The AUDIO IN 1 and 2 (both RCA) can be both used for audio input. For connection, select [INPUT 1] or [INPUT 2] from the SOUNDmenu.To audio right outputTo audio left outputPlasma monitorRCAPlasma monitor (second monitor)DIN 4 pinBNCBNC DIN 4 pinTo VIDEO IN To S-VIDEO INBNCDIN 4 pinBNCDIN 4pinTo VIDEO OUTTo S-VIDEO OUTBNC-to-RCAadapterVCR or Laser disc playerNOTE:VIDEO connectorS-VIDEO IN will take precedence over VIDEO IN when a component is connected to each connector.
