Program 22 : Incoming Call Setup22-01 : System Options for Incoming CallsLevel:INDescriptionUse Program 22-01 : System Options for Incoming Calls to define the system options for incomingcalls.Input DataItemNo.Item Input Data Description Default RelatedProgram01 Incoming CallPriority0 = Intercom Call Priori-ty1 = Trunk Call PriorityUse this option to determine if Inter-com calls or trunk calls have answerpriority when both are ringing simul-taneously.1 15-02-2202 Incoming CallRing No AnswerAlarm0 = Disable (Off)1 = Enable (On)If enabled, an incoming call thatrings longer than the Ring No An-swer Alarm interval (22-01-03),changes to a unique ring cadence toindicate that the call has been ring-ing too long. If disabled, this doesnot occur.0 22-01-0322-01-0403 Ring No AnswerAlarm Time0 ~ 64800 seconds If a trunk rings a multiline telephonelonger than this interval, the systemchanges the ring cadence. This indi-cates to the user that the call hasbeen ringing too long.60 22-01-0204 DIL No AnswerRecall Time0 ~ 64800 seconds0 = No OverflowA DIL that rings its programmeddestination longer than this intervaldiverts to the DIL No Answer RingGroup (set in Program 22-08).006 DID Ring-No-An-swer Time0 ~ 64800 seconds In systems with DID Ring-No-An-swer Intercept, this sets the Ring-No-Answer time. This time is howlong a DID call rings the destinationextension before rerouting to the in-tercept ring group.20 22-1207 DID IncomingRing Group NoAnswer Time0 ~ 64800 seconds 2008 DID Pilot Call NoAnswer Time0 ~ 64800 seconds 6009 DID to Trunk toTrunk no answertimer0 ~ 64800 seconds 2010 VRS WaitingMessage Opera-tion0 = Automatic Opera-tion1 = Manual OperationSet up the operation mode for AutoAttendant and Queuing Message.0 22-1422-1522-0822-0422-01-0420-15-1115-07ISSUE 6.0 SL1100Programming Manual 2-255Program22
