Program 92 : Copy Program92-01 : Copy ProgramLevel:INDescriptionNote: This program is available only via telephone programming and not through PC Programming.Use Program 92-01 : Copy Program to copy the data for one program to another multiline terminal,port, group, or other number. Refer to the following charts to see which programs can be copied.Input DataProgram Number XX ~ XXItem No. Item Input Data Description01Source Number • For Trunk Base : Trunk Port Number001 ~ 084• For Trunk Group Base : Trunk GroupNumber 01 ~ 25• For Extension Base : Extension Num-ber Maximum eight digits• For Department Group Base : De-partment Group Number 01 ~ 32• For DSS : DSS Console Number 01~ 12• For Door Phone: Door phone num-ber : 1 ~ 6Enter the extension, trunk, groupor other number from which thedata is to be copied.Destination Number (From) Enter the first extension, trunk,group or other number to whichthe information is to be copied.Destination Number (To) Enter the last extension, trunk,group or other number to whichthe information is to be copied. Ifthe information is being copiedonly to one extension, trunk,group or other number, enter theinformation entered in the Desti-nation Number (From) entry.The Copy Program is applicable only for the following programs :Trunk Port BaseProgram No. Program Name14-01 Trunk Basic Data SetupCopy all data except Trunk Name (Item 01).14-02 Analog Trunk Data Setup14-04 Behind PBX Setup14-08 Music on Hold Source for Trunks14-09 Conversation Recording Destination for Trunk20-30 Timer Class for Trunk21-03 Trunk Group Routing for Trunks21-12 ISDN Calling Party Number Setup for Trunk21-21 Toll Restriction for Trunks21-22 CO Message Waiting IndicationSL1100 ISSUE 6.02-612 Program 92 : Copy ProgramProgram92
