SL2100 GETTING STARTED GUIDE262.4 Environmental RequirementsMeeting established environmental standards maximizes the life of the system. Make sure thatthe site is not:• In direct sunlight or in hot, cold or humid places.• In dusty areas or in areas where sulfuric gases are produced.• In places where shocks or vibrations are frequent or strong.• In places where water or other fluids comes in contact with the equipment.• In areas near high-frequency machines or electric welders.• Near computers, telexes, microwaves, air conditioners, etc.• Near radio antennas (including shortwave).Section 3 Installing the ChassisWhen installing the chassis, always wall mount it. Before installing the chassis, the wall where theChassis is to be mounted must be able to support the weight of the Chassis and ensure theappropriate spacing exist as shown below.If an external battery is required, is must be supplied locally.3.1 Chassis DimensionFor the installation location, refer to the size of Chassis and re-confirm the installation spaces.3.2 Wall Mounting the ChassisThe chassis requires minimum space between the ceiling, floor or wall for ventilation. Refer tothe following figure to install the chassis.
