NEC SL2100 Getting Started Manual

Also see for UNIVERGE SL2100: User guide Quick install guide User guide Installation manual Programming manual

Contents

NEC SL2100 Getting Started Manual Manual pdf 59 page image

SL2100 GETTING STARTED GUIDE552.6.5 Assign a Function Key to each modeTo assign a key to each mode, you need to exit the Programming Mode. The keys are set using the telephone,not within SL2100 Programming Mode.Assign keys at the telephone(s) that will change the mode. A phone with an LCD is preferable. This is not done within the SL2100 Configuration Mode. Keys are changed by dialing a service code usingtelephone itself. You will need a separate key for each mode you are using. The key for the current mode lights red. To change the mode, press the appropriate key.2.6.5.1 Default SettingThere are no keys set to day/night modes on any of the telephones.No. Operation Display Shows;1 At the telephone that you want to be able to change day/night mode,press Speaker key.2 Dial service code 751.3 Press the Programmable Function Key you want to set (its currentsetting is shown in LCD display). If the key is not defined the function,go to step 5.4 If the Function Key is already assigned the function but not used, pressSpeaker Key + 752 + Function Key (to be cleared) + 000 + Speakerkey to clear the current setting and go back to step 1 again to set theFunction Key.5 Dial 09 followed by the mode number 1 to 8.1 = Day2 = Night 13 = Mid-Night 14 = Rest 15 = Day 26 = Night 27 = Mid-Night 28 = Rest 2☞ If you want to clear the Day/Night Mode key, press 00 after Step 3 toclear the function.6 Repeat 3 and 4 to set additional keys/modes.2.6.6 Configuration sheet: Telephone Ring AssignmentDefaults are shown.Place the telephones into Ring Groups.IRGNumberList of telephones that will ringPRG 22-04-01IRG 1 Default=101-108IRG 2IRG 3Key Program____1-20_FRI__ 6:51PM____101______________DONALD_Menu__Dir__VM:00_CL:00_Key Program_______Key xxxxxxxxxxxxxxxxx__Key Program_______Key xxNight Service 0__