• An IP Phone (IP Phone and Soft phone) with DSS console cannot be overridden from another IPPhone.• The login ID and Password are programmed in Program 15-05-27 and Program 84-22.• IP Phone Relocation can be used only in Manual Registration Mode.• Two ports of the same terminal type (Program 15-05-26) cannot be assigned to the same PersonalID index (Program 15-05-27).• When using Override with an active CTI connection, Program 15-05-39 must be enabled for theextensions that will be overridden. The overriding terminal must be of the same type and number ofline keys as the terminal to be overridden. If the types of terminals and number of keys are differentbetween overriding and overridden phones, the Telephony Service Providers (1st Party and 3rdParty) may not function properly.Table 9-4 IP Phone RelocationProgram/ItemNo.Description/SelectionAssigned Data Comments10-46-01 DT800/DT700 Server Informa-tion Setup – Register Mode0 = Plug and Play1 = Automatic2 = ManualDefault is 0Set up the information of the SIP Multiline(8IPLD series) Server.This Program is a system-wide setting.15-05-27 IP Telephone Terminal BasicData Setup – Personal ID In-dex0~1280Default is 0Used when the SIP Multiline telephone isusing manual/auto registration. Assign each phone aunique personal index. Then go to com-mand 84-22 to assign the user name andpassword.84-22-01 DT800/DT700 Multiline LogonInformation Setup – User IDUp to 32 charactersDefault not assignedInput the User ID when using manual orauto registration (Program 10-46-01).84-22-02 DT800/DT700 Multiline LogonInformation Setup – PasswordUp to 16 charactersDefault not assignedInput the Password when using manual orauto registration (Program 10-46-01).84-22-04 DT800/DT700 Multiline LogonInformation Setup – Log Off0 = Off1 = OnDefault is 1Input the Personal ID from terminal auto-matically when log on again.If set to 0, IP Phone Relocation fails.ISSUE 1.0 SL2100Networking Manual 9-45
