SECTION 4 MINIMUM REQUIRED PROGRAMMINGThe Level 1, Level 2 and Level 3 columns indicate the programs that are assigned whenprogramming this feature in the order they are most commonly used. These levels are used withPCPro and WebPro wizards for feature programming.• Level 1 – these are the most commonly assigned programs for this feature.• Level 2 – these are the next most commonly assigned programs for this feature.• Level 3 – these programs are not often assigned and require an expert level working knowledge ofthe system to be properly assigned.ProgramNumberProgram Name Description/Comments Assigned Data Level1 2 310-12-01 CPU Network Setup - IP Address Assign the IP Address for theCPU's NIC card. If a VoIPDB is in-stalled in the system it is recom-mended to set this to 0.0.0.0 andall connections to the system willbe made through the VoIPDB.0.0.0.0 ~126.255.255.254128.0.0.1 ~191.255.255.254192.0.0.1 ~223.255.255.254(default =192.168.0.10)✓10-12-03 CPU Network Setup – DefaultGatewayAssign the default gateway IP ad-dress for the CPU.0.0.0.0 ~126.255.255.254128.0.0.1 ~191.255.255.254192.0.0.1 ~223.255.255.254(default = 0.0.0.0)✓10-12-07 CPU Network Setup – NAPT Rout-er IP Address(Default Gateway [WAN])Define the IP Address of the WANside of the router.0.0.0.0 ~126.255.255.254128.0.0.1 ~191.255.255.254192.0.0.1 ~223.255.255.254(default = 0.0.0.0)✓10-12-09 CPU Network Setup – IP Address Assign the IP Address for theVoIPDB. If a VoIPDB is installedin the system it is recommendedto set PRG 10-12-01 to 0.0.0.0and all connections to the systemwill be made through the VoIPDB.0.0.0.0 ~126.255.255.254128.0.0.1 ~191.255.255.254192.0.0.1 ~223.255.255.254(default = 172.16.0.10)✓SL2100 ISSUE 1.011-4 NAPT
