tells you to enter the programming mode, dial 150701 from the telephone dial pad. After you do, youwill see the message “15-07-01 TEL” on the first line of the telephone display. This indicates theprogram number (15-07), item number (01), and that the options are being set for the extension. Thesecond row of the display “KY01 = *01” indicates that Key 01 is being programmed with the entry of*01. The third row allows you to move the cursor to the left or right, depending on which arrow ispressed. To learn how to enter the programming mode, refer to How to Enter Programming Mode onpage 5-2.SECTION 3 HOW TO ENTER PROGRAMMING MODETo enter programming mode :1. Go to any working display telephone.In a newly installed system, use extension (port 1).2. Do not lift the handset.3. Press Speaker.4. # * # *.5. Dial the system password + Hold.Refer to the following table for the default system passwords. To change the passwords, use90-02 : Programming Password Setup.Program ModeHybrid (4W) Multiline TerminalProgram ModeBase Service OP1 OP2IP Multiline TerminalPassword User Name Level Programs at this Level12345678 tech 2 (IN) Installation (IN) :IN, SA and SB levels defined by 90-26 are available.0000 admin1 3 (SA) System Administrator - Level 1 (SA) :10-01, 10-02, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-23,10-25, 10-28, 10-29, 10-45, 10-67, 10-74, 12-02, 12-03, 12-04, 12-08,15-01, 15-07, 15-09, 15-10, 15-11, 15-20, 20-16, 20-34, 20-57, 20-63,20-64, 20-66, 20-70, 21-07, 21-14, 22-04, 22-11, 22-17, 25-08, 30-03, ,32-02, 41-02, 41-03, 41-04, 41-05, 41-06, 41-07, 41-08, 41-09, 41-11,41-12, 41-13, 41-14, 41-16, 41-17, 41-18, 41-19, 41-20, 45-02, 84-16,84-22, 90-03, 90-04, 90-06, 90-07, 90-16, 90-19, 90-65, 93-01, 93-02,93-03, 93-04, 93-05, 93-069999 admin2 4 (SB) System Administrator - Level 2 (SB) :13-04, 13-05, 13-06, 13-11, 15-14, 21-20SL2100 ISSUE 1.05-2 PROGRAMMING
