Program 84 : Hardware Setup for VoIPDB84-10 : ToS SetupLevel:INDescriptionUse Program 84-10 : ToS Setup to set up the Type of Service data.Input DataProtocol Type1 = Not Used2 = Not Used3 = Reserved4 = H.3235 = RTP/RTCP6 = SIP7 = Reserved8 = SIP MLT9 = SIP Trunk10 = Reserved11 = ReservedItemNo.Item Input Data Description Default01 ToS Mode 0 = Disable (Invalid)1 = IP Precedence2 = DiffservWhen Input Data is set to 1, Item No. 07 isinvalid. When Data is set to 2, Item No. 02~ 05 are invalid.002 Priority, IP Prece-dence0 ~ 70 = Low7 = High1 = Router queuing priority 003 Low Delay 0 ~ 10 = Normal Delay1 = Low Delay1 = Optimize for low delay routing 004 Wideband (Through-out)0 ~ 10 = Normal Throughput1 = High Throughput1 = Optimize for high bandwidth routing 005 High Reliability 0 ~ 10 = Normal Reliability1 = Low Reliability1 = Optimize for reliability routing 007 Priority (D.S.C.P. - Dif-ferentiated ServicesCode Point)0 ~ 63 DSCP (Differentiated Services Code Point) 0Conditions• The system must be reset for these program options to take affect.Feature Cross ReferenceNoneSL2100 ISSUE 1.05-24 Program 84 : Hardware Setup for VoIPDBProgram84
