Figure 4-1 Example Configuration 1 - Existing Network with Static IP AddressAssume that a NEC SL2100 is added to the existing data network. The Network Administrator (or ITManager) should provide the following:• IP Address (for the CPU-C1)• IP Addresses (for the VoIP daughter board)• Subnet Mask• Default Gateway• A spare switchFirst, program the NEC SL2100:• 192.168.1.200• 255.255.255.0• PRG10-12-03: 192.168.1.254A system reset is required for the IP Address changes to take effect.Now connect the CPU-C1/VoIPDB Ethernet Port to the switch port, using a standard Cat-5 patchcable. The NEC SL2100 is now configured on the network and should be accessible by other deviceson the network. Refer to Figure 4-2 Example Configuration 1 - Adding the NEC SL2100 Chassis to theNetwork on page 4-4.ISSUE 1.0 SL2100Networking Manual 4-3
