NEC VT460 User Manual

Also see for VT460: Control commands Installation guide Quick connect guide Important information Specifications

NEC VT460 User Manual Manual pdf 13 page image

E-11312INSTALLATION AND CONNECTIONSThis section describes how to set up your projector and how to connect video and audio sources.To the wall outlet.Setting Up the Screen and the ProjectorSelecting a LocationThe further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" (0.53 m)measured diagonally when the projector is roughly 27.6 inches (0.7 m) from the wall or screen. The largest the image can be is 300" (7.6 m) whenthe projector is about 393.7 inches (10 m) from the wall or screen. Use the drawing below as a guide.Your projector is simple to set up and use.But before you get started, you must first:1Set up a screen and the projector.2Connect your computer or video equip-ment to the projector. See pageE-13 – 16.3Connect the supplied power cable. Seepage E-16.NOTE: Ensure that the power cable and anyother cables are disconnected before movingthe projector. When moving the projector orwhen it is not in use, cover the lens with thelens cap.300"240"406.4(W)X304.8(H)/160(W)X120(H)365.8(W)X274.3(H)/144(W)X108(H)304.8(W)X228.6(H)/120(W)X90(H)243.8(W)X182.9(H)/96(W)X72(H)203.2(W)X152.4(H)/80(W)X60(H)162.6(W)X121.9(H)/64(W)X48(H)121.9(W)X91.4(H)/48(W)X36(H)81.3(W)X61.0(H)/32(W)X24(H)61.0(W)X45.7(H)/24(W)X18(H)50.8(W)X38.1(H)/20(W)X15(H)42.7(W)X32(H)/17(W)X13(H)Lens centerScreen Size1.3/51.2"2.0/78.7"2.7/106.3"3.4/133.9"4.0/157.5"5.1/200.8"6.1/240.2"8.1/318.9"1.0/39.4"200"180"150"120"100"80"60"40"30"25"21"609.6(W)X457.2(H)/240(W)X180(H)Screen size (Unit: cm/inch)487.7(W)X365.8(H)/192(W)X144(H)6.7/263.8"Distance (Unit: m/inch)10.1/397.6"0.7/27.6"0.8/31.5"