NEC VT460 User Manual

Also see for VT460: Control commands Installation guide Quick connect guide Important information Specifications

NEC VT460 User Manual Manual pdf 7 page image

E-5INTRODUCTIONIntroduction to the ProjectorThis section introduces you to your new VT660/VT560/VT460 Projectorand describes the features and controls.Congratulations on Your Purchase of The VT660/VT560/VT460 ProjectorThe VT660/VT560/VT460 is one of the very best projectors availabletoday. The VT660/VT560/VT460 enables you to project precise imagesup to 300 inches across (measured diagonally) from your PC orMacintosh computer (desktop or notebook), VCR, DVD player, docu-ment camera, or a laser disc player.You can use the projector on a tabletop or cart, you can use the projec-tor to project images from behind the screen, and the projector can bepermanently mounted on a ceiling*1 . The remote control can be usedwirelessly.* 1 Do not attempt to mount the projector on a ceiling yourself.The projector must be installed by qualified technicians in orderto ensure proper operation and reduce the risk of bodily injury.In addition, the ceiling must be strong enough to support the pro-jector and the installation must be in accordance with any localbuilding codes. Please consult your dealer for more information.Features you'll enjoy:• Auto vertical keystone correction up to +/- 30 degrees• Low level noise• Short focal length lens• 200W lamp (160W Eco mode)• Direct keys for source selection• New Color Management system• New menu design improves operability• NEC’s exclusive Advanced AccuBlend intelligent pixel blending tech-nology - an extremely accurate image compression technology - of-fers a crisp image with UXGA (16001200) resolution* 2 .• Supports most IBM VGA, SVGA, XGA , SXGA/UXGA(with AdvancedAccuBlend)*2 , Macintosh, component signal (YCbCr/ YPbPr) or anyother RGB signals within a horizontal frequency range of 24 to 100kHz and a vertical frequency range of 50 to 120 Hz. This includesNTSC, PAL, PAL-N, PAL-M, PAL60, SECAM and NTSC4.43 stan-dard video signals.* 2 A UXGA (16001200) and SXGA image (12801024) are dis-played with NEC’s Advanced AccuBlend on VT660 and VT560.A UXGA (16001200), SXGA (12801024) and XGA(1024768) image are displayed with NEC’s AdvancedAccuBlend on VT460.NOTE: Composite video standards are as follows:NTSC: U.S. TV standard for video in U.S. and Canada.PAL: TV standard used in Western Europe.PAL-N: TV standard used in Argentine, Paraguay and Uruguay.PAL-M: TV standard used in Brazil.PAL60: TV standard used for NTSC playback on PAL TVs.SECAM: TV standard used in France and Eastern Europe.NTSC4.43: TV standard used in Middle East countries.• The supplied remote control can be used without a cable, and youcan even use the remote control to operate your PC's mousewirelessly from across the room with the built-in remote mouse func-tion.• You can control the projector with a PC using the PC Control port.• The contemporary cabinet design is light, compact, easy to carry,and complements any office, boardroom or auditorium.About this user's manualThe fastest way to get started is to take your time and do ev-erything right the first time. Take a few minutes now to reviewthe user's manual. This may save you time later on. At thebeginning of each section of the manual you'll find an over-view. If the section doesn't apply, you can skip it.• IBM is a trademark or registered trademark of International BusinessMachines Corporation.• Mac and PowerBook are trademarks of Apple Computer, Inc., regis-tered in the U.S. and other countries.• Windows, Windows 98, Windows Me, Windows XP or Windows 2000are trademarks or registered trademarks of Microsoft Corporation.• Other product and company names mentioned in this user’s manualmay be the trademarks or registered trademarks of their respectiveholders.