NEC VT460 User Manual
Also see for VT460: Control commandsInstallation guideQuick connect guideImportant informationSpecifications
                                            | |
Contents
| 
E-18Selecting a SourceSelecting the computer or video sourceUsing the Remote ControlOFF ONVIDEOS-VIDEO RGBPJMAGNIFYSELECTEMNUTERNENCEACLAUTO ADJ.FREEZE PIC-MUTEPICTUREVOLUMEHELPASPECTPOWERPress any one of the RGB, VIDEO orS-VIDEO buttons.Using the cabinet buttonsAdjusting the Picture Size and PositionPlace your projector on a flat level surface and ensure that the projectoris square to the screen.Lift the front edge of the projector to center the image vertically.* If the projected image does not appear square to the screen thenuse the Keystone feature for proper adjustment. See page E-19.Move the projector left to center the image horizontally on the screen.Adjust the Tilt Foot1. Lift the front edge of the projector.Adjustable Tilt Foot LeverAdjustable Tilt Foot2. Push up the Adjustable Tilt Foot Levers on the right and left sides ofthe projector to extend the adjustable tilt feet (maximum height).3. Push down the Adjustable Tilt Foot Levers.4. Lower the front of the projector to the desired height (max. 40mm/1.6”) and release the Adjustable Tilt Foot Lever to lock the Adjust-able tilt foot. There is approximately 10 degrees of up and down ad-justment for the front of the projector.Adjustable Tilt Foot LeverNOTE: If no input signal is available, the projector will display a blue background(factory preset).Press any one of the RGB,VIDEO or S-VIDEO buttons. |
Related manuals for NEC VT460
manualsdatabase
Your AI-powered manual search engine