NEC WT600 - XGA DLP Projector User Manual

Also see for WT600 Series: Supplementary guide Command guide Command guide Control commands Compatibility chart

Contents

NEC WT600 - XGA DLP Projector User Manual Manual pdf 50 page image

6-13NOTE: During 3D Reform adjustment, "Aspect Ratio" and "Screen"may not be available. Should this happen, first reset the 3D Reformdata and then do each setting. Second repeat the 3D Reform adjust-ment. Changing Aspect Ratio and/or Screen setting can limit 3D Re-form in its adjustable range.The adjustable ranges for 3D Reform are as follows:Horizontal ....... Max ±5° approx.Vertical ............ Max –5° to 0° approx.* The following are conditions at the above maximum anglewhen all of the following are met• Resolution is XGAHigher resolution than XGA limits 3D Reform in its adjustablerange.• Menu items should be set as follows:Aspect Ratio ...... 4:3Screen Type ...... 4:3• Horizontal and Vertical are adjusted separately.A combination of both adjustments limits 3D Reform in itsadjustable range.• When “4:3 Fill” is selected in Aspect Ratio, “Cornerstone” and“Horizontal Keystone” and “Pincushion” are not available.3. Correcting Keystone Distortion1. Press the SELECT button to adjust the horizontal key-stone.2. Press the SELECT button to select "Vertical".3. Press the SELECT button to adjust the vertical keystone.4. After completing, press the ENTER button. This will return tothe menu screen.* When "Resolution" is set to "Native", "Cornerstone", "Key-stone" and "Pincushion" are not available.* When any adjustment is made to the Digital Zoom or Pin-cushion option, the Cornerstone and Keystone options arenot available.6. Using On-Screen MenuDigital ZoomSee page 3-3 for using Digital Zoom.