NEC WT600 - XGA DLP Projector User Manual

Also see for WT600 Series: Supplementary guide Command guide Command guide Control commands Compatibility chart

Contents

NEC WT600 - XGA DLP Projector User Manual Manual pdf 55 page image

6-18Selecting Aspect Ratio and Position for Screen [Screen]Screen Type:Select either 4:3 Screen or 16:9 Screen for the screen to beused.See also "Aspect Ratio" on page 6-8.NOTE: When "Resolution" is set to "Native", this selection is inactive.Position:This feature adjusts the vertical position of the image whenviewing video with an aspect ratio selected.When some aspect ratios are selected in Image Options, theimage is displayed with black borders on the top and bottom.You can adjust the vertical position between top and bottom.NOTE: This option is not available when "4:3" is selected in ScreenType and "Letterbox" is selected in Aspect Ratio.NOTE: During 3D Reform adjustment, "Screen Type" and "ScreenPosition" may not be available. To make available, first reset the 3DReform data and then do settings again. Secondly repeat the 3D Re-form adjustment. Changing "Screen Type" and "Screen Position" canlimit 3D Reform in its adjustable range.Setting LAN ModeThis feature allows you to set various setting items when theprojector is used on your network.Consult with your network administrator about these settings.NOTE: A LAN card is required for LAN connection; NEC's optionalwireless LAN card is available. For more information on inserting orejecting a LAN card, see page 5-1.CAUTION: Make sure that the LAN card is removed duringStandby mode (NOT Idle mode) or with the main power off.Failure to do so may cause damage to your LAN card.IP AddressAn IP address can be automatically assigned to this projectorby your DHCP server. If your network does not automaticallyassign IP address, ask your network administrator for an ad-dress, and then register it manually.Automatic ................ Automatically assigns an IP address tothe projector from a DHCP server.Manual .................... Provides a space for you to register theIP address or subnet mask number ob-tained from your network administrator.IP Address ............... Set your IP address. Press to displaythe software keyboard and type in 12numeric characters.Subnet Mask ........... Set your subnet mask number. Pressto display the software keyboard andtype in 12 numeric characters.Projector Name ....... Specify a unique projector name. Pressto display the software keyboard andtype in. Up to 16 alphanumeric charac-ters can be used.Gateway .................. Set the default gateway of the networkconnected to the projector. Press todisplay the software keyboard and typein 12 numeric characters.Checking this box will make the set de-fault route valid. When data is sent fromthe LAN card, the transfer location willbe searched according to the previouslyset routing information; however, whenthe transfer location has not been foundas a result of the search, the data willbe sent to the device that holds the IPaddress set here. The IP address thatis set here must be one that can be iden-tified by a search of the routing infor-mation.6. Using On-Screen Menu