NEC WT600 - XGA DLP Projector User Manual

Also see for WT600 Series: Supplementary guide Command guide Command guide Control commands Compatibility chart

Contents

NEC WT600 - XGA DLP Projector User Manual Manual pdf 62 page image

6-25ToolsProvides tools for setting sleep timer, capturing images, display-ing files or changing your background logo in a PC Card anddrawing.NOTE: The "Capture" and "PC Card Files" features are required for aPC card.Using Sleep Timer1. Select your desired time between 30 minutes and 16 hours:Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.2. Select “Set” and press the ENTER button on the remote con-trol.3. The remaining time starts counting down.4. The projector will turn off after the countdown is complete.NOTE:• To cancel the preset time, set "Off" for the preset time or turn offthe power.• When the remaining time reaches 3 minutes before the projectoris turned off, the "Projector will turn off in 3 minutes" message willbe displayed on the bottom of the screen.Using CaptureAllows you to capture an image from a source that is currentlybeing displayed. The image is saved as JPEG in the PC card.When you select Capture from the menu, you will get a tool bar.You can capture an image directly using the tool bar when themenu is not displayed.See page 5-3.Using PC Card FilesThe PC Card Files feature allows you to display a list of all thefiles stored in the PC card so that you can select a file you wantto display. You can also sort files by file name or date, or displaythe file. See page 5-4.Changing Background Logo:You can change the default background logo using the PC CardFiles feature.NOTE: File size must be 256KB or less. Other file formats than JPEGand BMP are not available. See page 4-4.Using ChalkBoardThe ChalkBoard feature allows you to write and draw messageson a projected image. See page 4-4.NOTE: This feature is available only when using with USB mouse.See page 4-3.HelpContentsProvides an online help about how to use the menus. An under-lined link means that you can move to an adjustment item di-rectly.Selecting the underlined link and pressing ENTER moves to thecorresponding adjustment item.InformationDisplays the status of the current signal, and the lamp and theprojector usage hours. This dialog box has three pages.The information included are as follows:NOTE: The progress indicator shows the percentage of remainingbulb life. The value informs you of the amount of lamp and projectorusage respectively.6. Using On-Screen Menu[Page 1]Source NameInput TerminalEntry No.Horizontal FrequencyVertical FrequencySync Polarity[Page 2]Signal TypeVideo TypeSync TypeInterlace[Page 3]Remaining Lamp Time (%)Lamp Hour Meter (H)Projector Usage (H)Remaining Lamp Time DisplayWhen the remaining lamp time reaches 0, the Remaining LampTime bar indicator changes from 0% to 100 Hours and startscounting down. If the remaining lamp time reaches 0 hours, theprojector will not turn on regardless of whether the lamp modeis set to Normal or Eco.Returning to Factory DefaultThe Factory Default feature allows you to change adjustmentsand setting to the factory preset for source.All Data .................... Reset all the adjustments and settingsfor all the signals to the factory presetexcept Remaining Lamp Time, LampHour Meter, Projector Usage, Lan-guage, Background, Idle mode, Com-munication Speed, LAN Mode, Securityand Password.Including Entry List:Also deletes all the signals in the EntryList and returns to the factory preset.Current Signal ......... Resets the adjustments for the currentsignal to the factory preset levels.All the items in "Picture", "Volume", "Im-age Options" and "Picture Manage-ment" can be reset.