Napoleon LVX38N Installation Manual

Also see for LVX38N: Installation manual Installation manual

Contents

Napoleon LVX38N Installation Manual Manual pdf 11 page image

ENW415-1710 / A / 07.27.1711general informationSecure the lifting handles to the side of the applianceas shown with the screws supplied. Once theappliance is in place remove the four screws eachhandle to the appliance. Discard the lifting handles.1.5 mobile home installation1.7 lifting handles installation/removal1.6 hardware list1 2 3Description QuantityLVX38 LVX50 LVX62 LVX741 Hex Head Sheet Metal Screw 22 22 22 222 Pan Head Sheet Metal Screw 4 4 4 43 Hex Head Sheet Metal Bolt 18 18 18 18This appliance must be installed in accordance with the manufacturer’s instructions and the ManufacturedHome Construction and Safety Standard, Title 24 CFR, Part 3280, in the United States or the Mobile HomeStandard, CAN/CSA Z240 MH Series, in Canada. This appliance is only for use with the type(s) of gasindicated on the rating plate.This mobile/manufactured home listed appliance comes factory equipped with a means to secure the appliance. Theshipping brackets that secure the appliance to the pallet can be used to secure the appliance to the floor for mobilehome installation. For mobile home installations, the appliance must be fastened in place.This appliance is certified to be installed in an aftermarket permanently located, manufactured (mobile) home,where not prohibited by local codes.This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertiblefor use with other gases, unless a certified kit is used.Conversion KitsThis appliance is field convertible between Natural Gas (NG) and Propane (P). Propane not available for LVX74.To convert from one gas to another, consult your Authorized dealer/distributor.note:note:Only fasteners supplied with the appliance are illustrated.The lifting handles MUST be removed prior to roughframing the appliance.#1 (x4)